Zanussi ZBB28651SA User Manual

During transportation and installation of the
appliance, be certain that none of the com-
ponents of the refrigerant circuit become
damaged.
If the refrigerant circuit should become
damaged:

– avoid open flames and sources of ignition

– thoroughly ventilate the room in which the

appliance is situated

• It is dangerous to alter the specifications or

modify this product in any way. Any damage
to the cord may cause a short-circuit, fire
and/or electric shock.

Warning! Any electrical component
(power cord, plug, compressor) must be

replaced by a certified service agent or quali-
fied service personnel to avoid hazard.

1.

Power cord must not be lengthened.

2.

Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged
power plug may overheat and cause a
fire.

3.

Make sure that you can come to the
mains plug of the appliance.

4.

Do not pull the mains cable.

5.

If the power plug socket is loose, do not
insert the power plug. There is a risk of
electric shock or fire.

6.

You must not operate the appliance
without the lamp cover (if foreseen) of
interior lighting.

• This appliance is heavy. Care should be tak-

en when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are
damp/wet, as this could cause skin abra-
sions or frost/freezer burns.

• Avoid prolonged exposure of the appliance

to direct sunlight.

• Bulb lamps (if foreseen) used in this appli-

ance are special purpose lamps selected for
household appliances use only. They are not
suitable for household room illumination.

• Do not put hot pot on the plastic parts in the

appliance.

• Do not store flammable gas and liquid in the

appliance, because they may explode.

• Appliance's manufacturers storage recom-

mendations should be strictly adhered to.
Refer to relevant instructions.

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from
the mains socket.

• Do not clean the appliance with metal ob-

jects.

• Regularly examine the drain in the refrigera-

tor for defrosted water. If necessary, clean
the drain. If the drain is blocked, water will
collect in the bottom of the appliance.

Important! For electrical connection carefully
follow the instructions given in specific
paragraphs.

• Unpack the appliance and check if there are

damages on it. Do not connect the appli-
ance if it is damaged. Report possible dam-
ages immediately to the place you bought it.
In that case retain packing.

• It is advisable to wait at least four hours be-

fore connecting the appliance to allow the
oil to flow back in the compressor.

• Adequate air circulation should be around

the appliance, lacking this leads to over-
heating. To achieve sufficient ventilation fol-
low the instructions relevant to installation.

• Wherever possible the back of the product

should be against a wall to avoid touching
or catching warm parts (compressor, con-
denser) to prevent possible burn.

• The appliance must not be located close to

radiators or cookers.

• Make sure that the mains plug is accessible

after the installation of the appliance.

• Connect to potable water supply only (If a

water connection is foreseen).