Bosch TDS-2241 Sensixx B 22 L User Manual

22

BOSCH

* Model dependent

Loss of pressure 

during ironing. 

1. Steam release button has been 

activated for too long a period of 

time, that is, it has been pressed 

too frequently.

1. Use the steam release button at 

intervals. This improves the ironing 

result as the textiles will be steamed, 

dried and ironed properly. 

Water spots appear 

on the garment 

during ironing. 

1. May be caused by steam 

condensed on the ironing board. 

1. Wipe the textile cover of the ironing 

board, and iron any water drops to dry 

them. 

Water spots appear 

on the garment 

during use of the 

“PulseSteam” 

function. 

1. Water spots are caused by steam 

condensation in the hose when 

cooling down after use. 

1. Water drops stop coming out of the 

soleplate after using the “PulseSteam” 

function for some time. 

The hose gets hot 

during use. 

1. This is normal. It is caused by the 

steam passing through the hose 

during steam ironing. 

1. Place the hose on the opposite side so 

that you cannot touch the hose during 

ironing. 

Water leakage from 

the boiler. 

1. Filter (4*) located at the side of 

the appliance is loose. 

1. Tighten up the filter.

The iron does not 

stop steaming after 

placing it on the pad 

(2). 

1. “PulseSteam” function has been 

activated by double click. 

1. Just press the trigger once again and 

the iron will stop steaming at once. 

If the above does not solve the problem, get in touch with an authorised technical service.