Bosch TDS-2241 Sensixx B 22 L User Manual

20

BOSCH

* Model dependent

off the steam and rub off any residue 

immediately with a thickly folded, damp cotton 

cloth.

5. Never use abrasive products or solvents. To 

keep the soleplate (20) smooth, you should 

avoid hard contact with metal objects. Never 

use a scouring pad, or chemicals to clean the 

soleplate.



 

1. Always allow the appliance to cool down 

before storing it.

2. Set the main power button to the “0” position 

(the red light will go off) and disconnect the 

mains cable.

3. Empty the water tank.

4. 

Model dependent: Place the iron on the iron 

pad (2), standing on the soleplate, and fix it by 

inserting the tip of the iron into the front slot 

and moving the lock lever (14*) against the 

heel of the iron.  

Use the iron´s handle when moving the 

appliance.

5. Store the mains cable in the storage 

compartment (5) and the steam hose in the 

storage fixing (3). Do not wrap the cords too 

tight.

Steam production consumes the most energy. To 

help minimise the energy used, follow the advice 

below:

•  Start by ironing the fabrics that require the 

lowest ironing temperature. 

Check the recommended ironing temperature 

in the label on the garment.

•  Regulate the steam according to the selected 

ironing temperature, following the instructions 

in this manual.

•  Try to Iron the fabrics while they are still damp 

and reduce the steam setting. Steam will be 

generated from the fabrics rather than the iron. 

If you tumble dry your fabrics before ironing 

them, set the tumble drier on the ‘iron dry’ 

programme.

•  If the fabrics are damp enough, turn off the 

steam regulator completely.



 

 

E

This procedure helps to remove scale particles 

out of the steam chamber. 

This cleaning procedure may be performed 

occasionally (approximately once a year), when 

after a long period of use with very hard water, 

scale particles start to come out of the soleplate.
1 

Ensure that the iron is cooled down.

2 

Set the temperature selector (16) of the iron to 

the “min” position. 

3 

Fill the tank with tap water. 

4 

Plug in the mains cable and set the main 

power switch (13) to the “I” position.

5 

Wait until the “steam ready” indicator lamp (9) 

lights up. 

6 

If the steam station has steam regulator (11*), 

set it to the maximum position  . 

7 

Hold the iron over the sink or a container to 

collect the water.

8 

Press the steam release button (17) and 

gently shake the iron. Boiling water and steam 

will come out, carrying scale and or deposits 

that might be there. This could take 

approximately 5 minutes.

9 

Set the temperature selector (16) of the iron to 

the “max” position, without pressing the steam 

release button (17). The water in the steam 

chamber will start evaporating. Wait until all 

the water inside the chamber has been 

evaporated.

J 

To clean the soleplate, immediately rub off any 

residue by running the hot iron over dry cotton 

cloth.



 

 

E

1. After ironing, pull out the plug and allow the 

appliance to cool down before cleaning.

2. Wipe the housing, handle and iron body with a 

damp cotton cloth.

3. If the soleplate is soiled with dirt or scale, clean 

it with a damp cotton cloth.

4. If the cloth is synthetic, it may melt due to the 

high temperature on the soleplate (20). Switch