Cisco Cisco Unified Customer Voice Portal 11.0(1)

Do the following:

Configure the Gateway for VXML Server
(Standalone) applications:

•

For Steps 2 and 3, see the "

1. Define the VXML Server applications on the

gateway.

Note: Backup server is optional. For the
Tomcat Application Server and the WebSphere

•

For Step 4, see the "

Application Server, set the port to 7000. Also,
the backup server cannot be the same server as
the Primary Server.

2. Configure the base gateway settings.

3. Configure the service gateway settings.

4. Configure a dial-peer, which will call the

service to reach the Unified CVP VXML
Server.

5. Optionally, create additional dial-peers for any

outgoing transfer destinations your application
uses.

Review the updated gateway configuration by issuing
a show run to ensure you have configured the
gateway properly.

For detailed information, see the "

Create an application:

1. Create an application using Call Studio and

deploy it as a zip file.

7, "Configuring VXML Solution," in Part 2. Also, refer
to the User Guide for Cisco Unified CVP VXML Server
and Unified Call Studio  for information about using
Call Studio.

In the Operations Console, select Device Management
> VXML Server (standalone).

Configure the VXML Server:

1. In the Operations Console, configure a VXML

Server (standalone).

See the "

section in Chapter 7, "Configuring VXML Solution," in
Part 2 for more details.

In the Operations Console, select Device Management
> VXML Server.

Deploy the Call Studio application:

1. In the Operations Console on the VXML

Server, deploy the Call Studio application on
the VXML Server.

For detailed information, see the "

" section

in Chapter 7, "Configuring VXML Solution," in Part 2.

Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 4.1(1)