Cisco Cisco IOS Software Release 15.2(3)E Release Notes

For additional recovery procedures, see the “Troubleshooting” chapter in the software configuration guide for this release.

You can assign IP information to your switch by using these methods:

The Express Setup program, as described in the switch getting started guide.

The CLI-based setup program, as described in the switch hardware installation guide.

The DHCP-based autoconfiguration, as described in the switch software configuration guide.

Manually assigning an IP address, as described in the switch software configuration guide.

Device Sensor

(LAN Base)

Provides quick and easy access to all relevant documentation for specific platforms. 
Look for Quick Links to Platform Documentation on the respective platform 
documentation pages.

Integrated Documentation Guides

Provides platform and software documentation for two technologies:

IP Multicast Routing Configuration Guide 

Cisco Flexible Netflow Configuration Guide.

Smart Install

Smart Install is a plug-and-play configuration and image-management feature that 
provides zero-touch deployment for new switches. You can ship a switch to a location, 
place it in the network and power it on with no configuration required on the device. The 
IE 3010 switch can be a Smart Install Director. For more information, see Smart Install 
Configuration Guide here: