Cisco Cisco IOS Software Release 12.2(14)S
IGMP Version 3—Explicit Tracking of Hosts, Groups, and Channels
Supported Standards, MIBs, and RFCs
4
Cisco IOS Release 12.2(14)S
Supported Standards, MIBs, and RFCs
Standards
No new or modified standards are supported by this feature.
MIBs
No new or modified MIBs are supported by this feature.
To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules,
go to the Cisco MIB website on Cisco.com at the following URL:
go to the Cisco MIB website on Cisco.com at the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
RFCs
No new or modified RFCs are supported by this feature.
Configuration Tasks
See the following sections for configuration tasks for this feature. Each task in the list is identified as
either required or optional.
either required or optional.
•
(required)
•
(optional)
Enabling Explicit Tracking
To enable explicit tracking on an interface, use the following commands in interface configuration mode:
Verifying Explicit Tracking
To verify configuration of explicit tracking, use the following show commands in EXEC mode:
•
To verify that explicit tracking is enabled on an interface, use the show ip igmp interface command.
•
To display IGMP membership information for multicast groups and (S, G) channels, use the show
ip igmp membership command.
ip igmp membership command.
Note
The display output of the show ip igmp groups command is not affected by the explicit tracking
feature. When explicit tracking is enabled, this output will still display the aggregate membership
information of an interface.
feature. When explicit tracking is enabled, this output will still display the aggregate membership
information of an interface.
Command
Purpose
Step 1
Router (config-if)# ip igmp version 3
Enables IGMP Version 3 on the interface.
Version 2 is the default.
Version 2 is the default.
Step 2
Router (config-if)# ip igmp explicit-tracking
Enables explicit tracking on the interface.