Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
30
value change (AVC) event is generated for the managed element name. The NMS listens to the AVC
event for the managed element name and invokes
managedElementManager::ManagedElementManager_I:: getManagedElement.
event for the managed element name and invokes
managedElementManager::ManagedElementManager_I:: getManagedElement.
2.1.4 ONS 15310 MA SDH
See the
for the ONS 15310 MA SDH software releases that
Prime Optical 10.6 supports.
2.1.4.1
Slots
The ONS 15310 MA SDH consists of two CTX slots and four Expansion (EXP) I/O slots.
2.1.4.2
Topological Links
All topological links are unidirectional or bidirectional for ONS 15310 MASDH NEs.
2.1.4.3
Cards
The ONS 15310 MA SDH supports the following cards:
• CTX2500
– E1_21_E3_DS3_3_LINE_CARD—The electrical ports consist of 21 DS1 and 3 DS3 or EC1
ports.
– E1_63_E3_DS3_3_LINE_CARD—The electrical ports consist of 63 DS1 and 3 DS3 or EC1
ports.
• ML-100T-8
• CE-100T-8
• CE-100T-8
2.1.4.4
PTPs
All PTPs are bidirectional for the ONS 15310 MA SDH. The ports are always in channelized mode. PTPs
support In Service and Out of Service–Maintenance values for the service state attribute.
SNC provisioning on E1_21_DS3_3 and E1_63_E3_3 cards uses the following DS3/E3 ports:
support In Service and Out of Service–Maintenance values for the service state attribute.
SNC provisioning on E1_21_DS3_3 and E1_63_E3_3 cards uses the following DS3/E3 ports:
• E1_21_DS3_3—Port numbers 22, 23, and 24.
• E1_63_E3_3—Port numbers 64, 65, and 66.
• E1_63_E3_3—Port numbers 64, 65, and 66.
2.1.4.5
Auto Discovery
The ONS 15310 MA SDH supports automatic discovery of connected elements. Prime Optical can
connect to one node and retrieve information about all connected nodes. The first time Prime Optical
connects to a node, it retrieves only the IP address of the connected node; Prime Optical does not retrieve
the node name. However, Prime Optical must report this element to the users. Because the IP address is
unique, Prime Optical initializes the name of the newly discovered element with the IP address. An object
creation event is generated for this managed element with the IP address as the name. Later, Prime
Optical connects to this element and retrieves all information, including the actual name, and an AVC
event is generated for the managed element name. The NMS listens to the AVC event for the managed
element name and invokes managedElementManager::ManagedElementManager_I::
getManagedElement.
connect to one node and retrieve information about all connected nodes. The first time Prime Optical
connects to a node, it retrieves only the IP address of the connected node; Prime Optical does not retrieve
the node name. However, Prime Optical must report this element to the users. Because the IP address is
unique, Prime Optical initializes the name of the newly discovered element with the IP address. An object
creation event is generated for this managed element with the IP address as the name. Later, Prime
Optical connects to this element and retrieves all information, including the actual name, and an AVC
event is generated for the managed element name. The NMS listens to the AVC event for the managed
element name and invokes managedElementManager::ManagedElementManager_I::
getManagedElement.
2.1.5 ONS 15310 MA SONET
See the
for the ONS 15310 MA SONET software releases
that Prime Optical 10.6 supports.
2.1.5.1
Slots
The ONS 15310 MA SONET consists of two CTX slots and four EXP I/O slots.