Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
28
2.1.3 ONS 15310 CL
See the Release Notes for Cisco Prime Optical 10.6 for the ONS 15310 CL software releases that Prime
Optical 10.6 supports.
Optical 10.6 supports.
2.1.3.1
Slots
The ONS 15310 CL is a single-shelf NE with two slots. Slot 1 is the expansion slot and contains the
provisionable data card. Slot 2 is a nonreplicable unit and contains the Control Timing and Cross-Connect
(CTX)-CL controller.
provisionable data card. Slot 2 is a nonreplicable unit and contains the Control Timing and Cross-Connect
(CTX)-CL controller.
2.1.3.2
Equipment
All cards for the ONS 15310 CL R5.0 and later display administration and service states. For earlier
software releases, these states are not applicable and Prime Optical displays them as N/A. The following
tables show the attribute values for these two states.
software releases, these states are not applicable and Prime Optical displays them as N/A. The following
tables show the attribute values for these two states.
2.1.3.2.1
Equipment Administration State
The attribute name is ACTUAL_EQUIPMENT_SERVICE_STATE and is displayed in getAdditionalInfo
for the equipment.
for the equipment.
Table 2-1: Equipment Administration State (ONS 15310 CL)
Attribute Value
Meaning
In Service
Places the entity In Service.
Auto in Service
Places the entity in Auto in Service. The circuit is out of service until it
receives a valid signal for the duration of the soak period, at which time
the circuit state changes to In Service. During the soak period, alarms
and loopbacks are suppressed but traffic is carried.
receives a valid signal for the duration of the soak period, at which time
the circuit state changes to In Service. During the soak period, alarms
and loopbacks are suppressed but traffic is carried.
Out of Service–Maintenance
Removes the entity from service for maintenance. Alarms are no longer
generated.
generated.
Out of Service
Removes the entity from service and disables it. Alarms are no longer
generated and traffic is not carried.
generated and traffic is not carried.
2.1.3.2.2
Equipment Service State
The attribute name is ACTUAL_EQUIPMENT_SERVICE_STATE and is displayed in getAdditionalInfo
for the equipment. The attribute value for the service state is the same as that shown in Prime Optical.
for the equipment. The attribute value for the service state is the same as that shown in Prime Optical.
Table 2-2: Equipment Service State–Primary (ONS 15310 CL)
Primary States (PST-PSTQ)
Attribute Value
Attribute Value
Meaning
In Service–Normal (IS_NR)
The entity is fully operational and performs as provisioned.
Out of Service–Management
(OOS_MA)
(OOS_MA)
The entity has been administratively removed from service.
Out of Service–Autonomous
(OOS_AU)
(OOS_AU)
The entity is not operational due to an autonomous event.
Out of Service–Autonomous
and Management
(OOS_AUMA)
and Management
(OOS_AUMA)
The entity is not operational due to an autonomous event and has been
administratively removed from service.
administratively removed from service.