Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
483
This interface modifies an existing TC profile as specified by the parameters in the method. A TC profile
with the data to be changed is passed as input. The resulting TC profile is returned as a result. If the TC
profile modification completes successfully, the EMS sends out an AVC event notification.
Object Modification Notification Example
with the data to be changed is passed as input. The resulting TC profile is returned as a result. If the TC
profile modification completes successfully, the EMS sends out an AVC event notification.
Object Modification Notification Example
The above notification shows:
• objectType is set to OT_AID
• objectTypeQualifier is set to OT_TRAFFIC_CONDITIONING_PROFILE
• objectName contains the TC profile name before the object was changed
• atributeList can contain up to two tuples:
• objectTypeQualifier is set to OT_TRAFFIC_CONDITIONING_PROFILE
• objectName contains the TC profile name before the object was changed
• atributeList can contain up to two tuples:
– userLabel—If the object name has changed, userLabel provides the new user label.
– additionalInfo—Contains the indication "additionalInfo changed" if the object additionalInfo
– additionalInfo—Contains the indication "additionalInfo changed" if the object additionalInfo
has changed.
4.6 MPLS-TP Provisioning Interfaces
This section describes the following MPLS-TP provisioning interfaces:
•
•
•
•
4.6.1 MPLS-TP Tunnel Provisioning Interfaces
This section describes the following interfaces:
•
•
•