eutech-instruments cyberscan ph 110 phmvrs232 meter User Manual

Instruction Manual   

 

CyberScan pH 11 / 110  

 

25

To manually print any data that is currently being 
measured:  

1.  From measurement mode, press HOLD key to 

freeze reading. See Figure 24.  

2.  Print PRINT (

) key.  

3.  The “Prn – CUr” annunciator will appear and 

flash for about 0.5 seconds. The data is 
transmitted to the printer or computer.  

4.  The meter returns to measurement mode.  

5.  Repeat steps 1 to 3 for next measurement.  

 

This feature is useful to automate printing and 
downloading ‘live’ measurement values into computer. 
The time interval setting can range from 5 to 30 
seconds.  

1.  From pH or mV measurement mode, press 

PRINT key.  

2. Select “Dat/Cur” screen and press 

HOLD/ENTER key.  

3.  The “Sec 5” screen appears. The default value 

is 5 seconds time interval. See Figure 25.  

4. Press 

MI/▲ or MR/▼ key to set a value suitable for your application.  

5.  Press HOLD/ENTER key.  

6.  The meter goes into measurement mode with MEM annunciator flashing.  

7.  At a pre-set time interval, the screen flashes “Prn/CUr” momentarily (printing 

data) and switches back to measurement mode with MEM annunciator 
flashing.  

8.  To stop printing, press PRINT key. The MEM annunciator disappears and the 

meter is on measurement mode.  

 

 23.4

 23.4

6.55

6.55

Flash for 0.5 seconds

 23.4

6.55