eutech-instruments cyberscan ph 110 phmvrs232 meter User Manual

Instruction Manual   

 

CyberScan pH 11 / 110  

 

42

This mode lets you reset all parameters to factory 
default settings. There are two levels of reset:  

•  Calibration Reset: Reset only the calibration 

values. This clears all previous calibrated 
values and reset to factory default. See page 68 
and 69 for factory default settings. 

•  User Reset: Clears all data including 

calibration, memory and other customised 
setup functions and reset it to factory default. 
See page 68 and 69 for factory default settings. 

From measurement mode: 

1. 

Press SETUP key to enter Set Up mode.  

2. 

Press the MI/▲ or MR/▼ keys to scroll 
through subgroups until you view parameter 
P5.0.  

3. 

Press the HOLD/ENTER key.  

4. 

Press the MI/▲ or MR/▼ keys to toggle 
between NO and YES.  

•  ‘NO’ retains current settings 

•  ‘YES’ erase calibration settings.  

5. 

Press the HOLD/ENTER key to confirm 
selection.  

•  If ‘NO’ is selected, it will retains current 

settings and proceed to next program 
P5.2 – User Reset.  

•  If ‘YES’ is selected, all LCD segments will 

lit up for one second, erase calibration 
values, and the meter switches to the 
measurement mode.  

6. 

Otherwise press CAL/MEAS key to return to 
measurement mode without resetting to factory default.  

See Figure 38.  

yes

 P 5.0

 P 5.1

CAL

CAL

CAL

Select either "YES" or "nO", 

press ENTER key to confirm.