Apple xserve Service Manual
Xserve Take Apart -
11
PCI or AGP Card
Part Location
Card in Single-Slot Riser
Card in Dual-Slot Riser
Procedure for Card in Dual-Slot Riser
1.
Release the thumb screw that secures the card fence to the back of the server.
2.
If there are latches on either side of the riser, lift them slightly to release the riser from
the logic board.
3.
Pull the riser a short distance to the side to disconnect it, and then tilt the riser and
attached card(s) up so that the card ports clear the enclosure. Remove the riser and
card(s) from the server.