Audiovox 50-0301x-014 series User Manual

                                                                                                5

 
 

10. Install foam tape (item 5 pg 2) along each side of 

mounting bracket where lines were previously 
marked. See Figure 7. 

11. Remove adhesive backing from Velcro tape along 

bottom of VCP bracket. See Figure 7. 

 

 

 

 

 

        

12. Install VCP housing  (item 4 pg 2) and secure to 

mounting bracket using (2) two # 8 X 9/16" screws,  
removed in step 4. (item 1 pg 2). See Fig. 8. Make 
sure Velcro tape adheres to bottom of VCP housing.

 
 
 
 
 
 
 

 
 
 
 
 

13. Trim floor mat, if applicable, to fit around VCP 

housing. See Figure 9. 

14. Raise seat into locked upright position. 
15. Replace storage cover, if applicable, in original 

location. 

 
 

 

 

 

FIGURE 8 

FIGURE 9 

FIGURE 7