Audiovox 50-0312x series User Manual

                                                                                                5

11.  Remove protective backing from Velcro tape and 

insert VCP into mounting bracket (item 2 pg 2) as 
shown in Figure 7.  Make sure that holes in VCP 
align with holes in bracket. Connect all wiring to 
VCP per instructions  included with video system. 

12.  Check function of all components.  See operating 

instruction for video system operations check.  For 
further assistance, refer to the video system manual 
for the technical support phone number listed for 
your area. 

13.  Install (2) two # 8 X 3/4" screws (item 1 pg 2) 

which secure VCP to mounting bracket. Do not 
overtighten screws.  See Figure 7. 

 
 

 

        

14. Install VCP cover  (item 5 pg 2). Make sure that 

Velcro tape adheres to cover. See Fig. 8.

 
 
 
 
 
 

 
 
 
 
 
 
 
 

15.  Install rear seat in original manner. Check seat 

travel to make sure that there is no interference 
with VCP. See Figure 9. 

 
 
 
 
 
 

 

 

 

FIGURE 8 

FIGURE 9 

FIGURE 7