andi axc1200fwt User Manual

 4 

 
INSTRUCTION GUIDE FOR GAS COOKTOP 
 
 
GAS BURNER IGNITION AND REGULATION 
 
For models with single action automatic ignition, place a pan on the burner 
grate. Push in and turn the knob counterclockwise to the LIGHT-HIGH 
setting. A clicking sound will be heard and the burner will light, fig. 2. (All 
surface ignitors will spark when any control knob is turned to the LIGHT-HIGH 
position), keep it pushed in till burner lights. After the burner lights, turn the 
knob to the desired flame size, fig.1. 
 
For models equipped with both electronic ignition and safety device, follow 
the same procedure as for models with automatic ignition described above,  
but you have to keep pushing in for at less 5 seconds till thermocouple is hot 
enough. Then release the knob and the burner should remain on.  
 
During a power failure, hold a lighted match to the desired burner head. Push 
in and turn the knob counterclockwise to the LIGHT-HIGH setting. After the 
burner lights, turn the knob to the desired flame size, fig.1. 
Caution: When lighting the burner, be sure all of the controls are in the OFF 
position. Strike the match first and hold it in position before turning to knob to 
LIGHT-HIGH. 
 
 
 
 

                                                                                              

 
 

                                                                                                               

                                                                                 

 

Fig. 1 

 
 
 
 
 
 
 
 
 
 

Fig. 2