APRILIA quasar 100 User Manual
45
use and maintenance
Quasar 50 - 100 - 125 - 180
Battery
WARNING
Risk of fire.
K e e p f u e l a n d o t h e r f l a m m a b l e
K e e p f u e l a n d o t h e r f l a m m a b l e
s u b s t a n c e s a w a y f r o m e l e c t r i c
components.
Never invert the battery cables.
Ensure that the ignition switch is in the
"" position before connecting or
Never invert the battery cables.
Ensure that the ignition switch is in the
"" position before connecting or
disconnecting the battery, otherwise
some components might damage.
Connect the positive cable (+) first and
Connect the positive cable (+) first and
then the negative cable (-).
Disconnect in the reverse order.
Disconnect in the reverse order.
CAUTION
This vehicle is fitted
with a maintenance-free battery which
seldom needs inspecting and may need
charging from time to time.
seldom needs inspecting and may need
charging from time to time.
Disconnect the terminals if the vehicle is to
be left unused for a long period.
be left unused for a long period.
CHECKING AND CLEANING THE
TERMINALS
TERMINALS
Carefully read page 45 (Battery)
◆
Ensure the ignition switch is in the ""
position.
position.
◆
Remove the seat, see page 19
(GLOVE/TOOL KIT COMPARTMENT).
(GLOVE/TOOL KIT COMPARTMENT).
◆
Slide the red protective cap (1) aside.
◆
Make sure that the cable terminals and
the battery terminals are:
√ in good condition (and not corroded or
the battery terminals are:
√ in good condition (and not corroded or
covered with deposits);
√ c o v e r e d w i t h n e u t r a l g r e a s e o r
Vaseline.
If necessary:
◆
Remove the battery, see page 45
(REMOVING THE BATTERY)
(REMOVING THE BATTERY)
◆
Clean off cable and battery terminals
with a wire brush to remove all traces of
corrosion.
with a wire brush to remove all traces of
corrosion.
◆
Install the battery, see page 47
(INSTALLING THE BATTERY)
(INSTALLING THE BATTERY)
REMOVING THE BATTERY
◆
Ensure the ignition switch is in the ""
position.
position.
◆
Remove the seat.
◆
Release and remove the negative (-)
terminal screw.
terminal screw.
◆
Move aside the negative cable.
◆
Slide the red protective cap (1) aside.
◆
Release and remove the positive (+)
terminal screw.
terminal screw.
◆
Move aside the positive cable.
◆
Remove the battery retaining grommet
(2).
(2).
1
2