Sony dvp-nc655p User Manual

Page of 84
73
Set
tings
 a
nd 
Adj
u
st
m
e
nt
s
◆ DOWNMIX (DVD only)
Switches the method for mixing down to 2 
channels when you play a DVD which has 
rear sound elements (channels) or is recorded 
in Dolby Digital format. For details on the 
rear signal components, see “Displaying the 
audio information of the disc” (page 51)
. This 
function affects the output of the following 
jacks:
– LINE OUT L/R (AUDIO) 1/2 jacks
– DIGITAL OUT (COAXIAL or OPTICAL) 
jack when “DOLBY DIGITAL” is set to 
“D-PCM” (page 73).
◆ DIGITAL OUT
Selects if audio signals are output via the 
DIGITAL OUT (COAXIAL or OPTICAL) 
jack.
Setting the digital output signal
Switches the method of outputting audio 
signals when you connect a component such 
as an amplifier (receiver) or MD deck with a 
digital input jack.
For connection details, see page 20.
Select “DOLBY DIGITAL” and “DTS” after 
setting “DIGITAL OUT” to “ON.”
If you connect a component that does not 
conform to the selected audio signal, a loud 
noise (or no sound) will come out from the 
speakers, affecting your ears or causing the 
speakers to be damaged.
◆ DOLBY DIGITAL (DVD VIDEO/DVD-RW 
only)
Selects the type of Dolby Digital signal.
◆ DTS (DVD VIDEO only)
Selects whether or not to output DTS signal.
DOLBY 
SUR-
ROUND
Select this when the player is 
connected to an audio 
component that conforms to 
Dolby Surround (Pro Logic).
NORMAL
Select this when the player is 
connected to an audio 
component that does not 
conform to Dolby Surround (Pro 
Logic).
ON
Normally select this position. When 
you select “ON,” see “Setting the 
digital output signal”
 for further 
settings.
OFF
The influence of the digital circuit 
upon the analog circuit is minimal.
D-PCM
Select this when the player is 
connected to an audio 
component lacking a built-in 
Dolby Digital decoder. You can 
select whether the signals 
conform to Dolby Surround 
(Pro Logic) or not by making 
adjustments to the 
“DOWNMIX” item in 
“AUDIO SETUP” (page 73).
DOLBY 
DIGITAL
Select this when the player is 
connected to an audio 
component with a built-in 
Dolby Digital decoder.
OFF
Select this when the player is 
connected to an audio 
component lacking a built-in 
DTS decoder.
ON
Select this when the player is 
connected to an audio 
component with a built-in DTS 
decoder.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
OFF
continued