Sony HT-SS1200 User Manual

D:\Chin Meng's job\SONY-HA\HT-SF1200_R2\1200_data\3210767121\GB05AMP_HT-SF1200-
CEL.fm

[HT-SF1200/HT-SS1200]

3-210-767-12

(2)

You can also use INPUT SELECTOR on 
the receiver.

Press TUNING + to scan from low to 
high; press TUNING – to scan from high 
to low.
The receiver stops scanning whenever a 
station is received.

If the FM stereo reception is poor and “ST” 
flashes on the display, select monaural audio 
so that the sound will be less distorted.
To select monaural audio, you can
– press FM MODE repeatedly until the 

“MONO” indicator lights up on the display.

– set “FM MODE” in TUNER menu to “FM 

MONO” (page 38).

To return to stereo mode, you can
– press FM MODE repeatedly until the 

“MONO” indicator on the display do not 
light up.

– set “FM MODE” in TUNER menu to “FM 

You can enter the frequency of a station 
directly by using the numeric buttons.

You can also use INPUT SELECTOR on 
the receiver.

Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0

If you have tuned in an AM station, adjust 
the direction of the AM loop antenna for 
optimum reception.

Make sure you have entered the right 
frequency. If not, repeat steps 2 to 4. If you 
still cannot tune in a station, the frequency is 
not used in your area.

-