Sony MDS-JB940 User Manual

Page of 120
53
GB
Self-diagnosis function
Ad
d
itiona
l In
fo
rmati
o
n
Self-diagnosis function
The deck’s self-diagnosis function automatically checks 
the condition of the MD deck when an error occurs, then 
issues a three- or five-digit code and an error message on 
the display. If the code and message alternate, find them in 
the following table and perform the indicated 
countermeasure. Should the problem persist, consult your 
nearest Sony dealer.
Three- or five-
digit code/
Message
Cause/Remedy
C11/Protected
The inserted MD is record-protected.
, Take out the MD and close the record-
protect slot (page 15).
C12/Cannot Copy
You tried to record a CD with a format 
that the external device connected to the 
deck does not support, such as CD-ROM 
or video CD.
, Remove the disc and insert a music 
CD.
C13/Rec Error
The recording was not made properly.
, Set the deck in a stable surface, and 
repeat the recording procedure.
The inserted MD is dirty (with smudges, 
fingerprints, etc.), scratched, or 
substandard in quality.
, Replace the disc and repeat the 
recording procedure.
C13/Read Error
The deck could not read the TOC on the 
MD properly.
, Take out the MD and insert it again.
C14/Toc Error
The deck could not read the TOC on the 
MD properly.
, Insert another disc.
, If possible, erase all the tracks on the 
C41/Cannot Copy
The sound source is a copy of 
commercially available music software, or 
you tried to record a CD-R (Recordable 
CD).
, The Serial Copy Management System 
prevents making a digital copy 
(page 52). You cannot record a CD-R.
C71/Din Unlock
The sporadic appearance of this message 
is caused by the digital signal being 
recorded. This will not affect the 
recording.
While recording from a digital component 
connected through the DIGITAL IN 
connector, the digital connecting cable 
was unplugged or the digital component 
turned off.
, Connect the cable or turn the digital 
component back on.
E0001/
MEMORY NG
There is an error in the internal data that 
the deck needs in order to operate.
, Consult your nearest Sony dealer.
E0101/
LASER NG
There is a problem with the optical 
pickup.
, The optical pickup may have failed. 
Consult your nearest Sony dealer.
Three- or five-
digit code/
Message
Cause/Remedy