Elite Screens TE135HC2 User Manual
INSTALLATION
The CineTension 2 series screen is designed for installation on either a wall or ceiling. All hardware is included to
allow either installation method however we do strongly recommend a professional installation for safety purposes.
The extruded hanging brackets are designed to slide anywhere on the back of the screen to accommodate a
wall or ceiling installation and provide an easy alignment with wood studs and trusses.
Please follow the steps below for recommended installation instructions.
allow either installation method however we do strongly recommend a professional installation for safety purposes.
The extruded hanging brackets are designed to slide anywhere on the back of the screen to accommodate a
wall or ceiling installation and provide an easy alignment with wood studs and trusses.
Please follow the steps below for recommended installation instructions.
Mounting Hardware Kit – Please make sure all of the following items have been supplied before proceeding
installation.
installation.
Parts identification:
1. Begin by sliding the Bolts (B) thru the left and right slide channel located on the top back of the CineTension 2
screen’s casing as shown on picture.
2. Slide the Extruded Hanging Brackets (D) thru the rail located below the slide channel until it meets with the top part
of the bolts (B) and then slightly tighten the lug-nuts located on the top and bottom of the bolt with a wrench to secure
the extruded hanging brackets.
C
Qty 2 –Extruded Hanging
Brackets
(Qty 3 on 120 models and above)
B
Qty 2 - Bolts
A
Qty 2 – Screws
Qty 2 – Drywall Anchors