Nokia 3600, 3620 Service Manual
CCS Technical Documentation
3 - Service Software
Company Confidential
NHM-10
Issue 2 01/2004
Copyright 2004 Nokia Corporation
Page 3-11
Company Confidential
•
Save the package to your hard disk and install it by double clicking it.
NOTE! It is recommended that you uninstall previous Phoenix package before installing
the new one. Do it as follows:
the new one. Do it as follows:
•
Click Start -> Settings -> Control Panel
•
Add/Remove Prog.
•
Phoenix NHM-10 release
•
Add/Remove
Reboot your computer after uninstallation
FPS-8 to PC connection Setup instructions
Establish connection between your PC and FPS-8. The procedure is as follows:
•
Start phoenix
•
Choose
File -> Manage connections
•
Choose
Add
•
Select mode, select
Manual
•
As Media, select
FPS-8
•
Port number, select the port where you have connected the serial cable of
FPS-8.
FPS-8.
•
COMBOX_DEF_MEDIA, select
FBUS
•
Click on
Finish
•
Press
Arrow up key so that FPS8 COM1 FBUS becomes the first on the
list.
•
Press
Apply and close the window
The connection between PC and FPS-8 has now been configured.
FPS-8 activation
Follow the instructions inside FPS-8 sales pack to get FPS-8 activated.
Checking Application SW version inside FPS-8
When you have connection established to FPS-8 and FPS-8 has been activated, the first
thing to do is to check that you have correct application SW version inside FPS-8. Phoe-
nix SW can check that automatically. The procedure goes as follows:
thing to do is to check that you have correct application SW version inside FPS-8. Phoe-
nix SW can check that automatically. The procedure goes as follows:
Go to the partner web site and take newest AMS FPS-8 SW.
Instructions:
•
Click Fps-8 downloads
•
Click
Flash Update