Nokia 3600, 3620 Service Manual
CCS Technical Documentation
3 - Service Software
Company Confidential
NHM-10
Issue 2 01/2004
Copyright 2004 Nokia Corporation
Page 3-13
Company Confidential
Click
Yes and you see on the small scree as the Prommer goes to service mode (mode2 is
lit) SW goes into box, application SW , Secondary boot codes and algorithm codes are
updated.
updated.
There is no longer need to do anything special with NHM-10 specific Secondart boot
codes and algorithm codes.
codes and algorithm codes.
Your PC and FPS-8 is now ready for NHM-10 SW update.
Reprogramming NHM-10
Connecting cables
Once you have the NHM-10 opened and the battery and SIM removed, attach it to the
FLA-48 adapter. Once connected to the FLA-48 the phone goes to local mode and the
screen will not show anything during SW update.
FLA-48 adapter. Once connected to the FLA-48 the phone goes to local mode and the
screen will not show anything during SW update.
Proceed as follows:
•
Connect XCS-4 cable from FLA-48 to FPS-8
•
Connect FLC-2 cable from FPS-8 to FLA-48
•
There is no need to press the phone power key. Phone has set itself auto-
matically to local mode and it is now ready for SW update.
matically to local mode and it is now ready for SW update.
Settings backup/restore
It is quicker to use MMC user data backup, which can be found at: Menu > extras >
memory > options > backup phone memory.
memory > options > backup phone memory.
Start Phoenix SW by double clicking the
Phoenix icon on your desktop.
•
Now choose
File -> Scan product. If phone is ok, you should see the SW
version in lower right-hand corner, e.g. V3.1
•
If the scanning finds nothing, the phone is most likely in some strange
mode.
mode.
Settings Backup:
•
Click
Product
•
Click
User settings
•
Click
All Settings
•
Click
Browse
•
Choose from Directory
C:\Program files\Nokia\Phoenix\Products\ file
Nhl8sett.ini
You will now see the following PC screen: