Siemens gigaset c100 dect User Manual

Gigaset C100 / englisch / A31008-C100-J101-1-7619 / registration.fm / 24.06.2003

This section describes how to connect handsets belonging to the Gigaset families, hand-

sets A 2, C 2, S 1 or handsets of other devices with GAP functionality to your C 100/C 

150 . 

Start to register the handset as described in its operating instructions.

The next unassigned internal number (1–6) is automatically assigned to the handset as 

it is registered. If all the numbers have been assigned, number 6 is overwritten provided 

the handset is in idle status.

You can de-register any registered handset from any registered C 1 handset.

If you have mislaid your handset you can 'page' it with the help of the base. The Regis-

tration/Paging key is on the base to the right of the handset shell (page 40). 

Press the Registration/Paging key on the base 

(page 40)  until you hear a signal tone (C 150 only)  

(approx. 3 sec.).. Registration is initiated. 

[_______]

Open list of handsets. 

[_________] [________________]

Select the handset you wish to de-register (your own 

handset is checked 

‰

) and press the display key.

[__________] [_____________________________________________________________]

De-register Handset

[_________]

Select the menu item and confirm.

[_______]

Enter the current system PIN (the default setting is 

0000) and confirm.

[_______]

Press the display keyto confirm the prompt.

Press the Registration/Paging key on the base for 1 

second. All handsets will ring together ('Paging').
End paging:
Press the Registration/Paging key on the base again 

for 1 second or press the top half of the 

c

 key.

i

◆

Paging ends automatically after 30 seconds.

◆

The paging call can be heard even when the ringer is switched off.