Siemens gigaset c475 ip User Manual

Using several handsets

Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 18.12.07

Ve

rs

ion 2.

1, 

08.0

1.20

07

You can register other Gigaset handsets and handsets for other devices with GAP function-

ality as follows. 

¤

Begin the registration procedure on the handset in accordance with the handset's oper-

ating instructions.

¤

Press and hold (for approx. 3 seconds) the registration/paging key (page 2) on the base 

station. 

You can de-register any registered handset from any registered Gigaset C47H handset.
u

Open list of internal parties.

The handset which you are using is marked with <.

q

Select the handset to be de-registered.

Press the display key.

Select and press 

. 

~

Enter the current base station system PIN (default setting: 0000). 

Press the display key to confirm the prompt.

a

Press and hold (idle status). 

The handset is de-registered immediately, even if it is not in idle status.

You can locate your handset using the base station. 

¤

Briefly press the registration/paging key on the base station (page 2).

¤

All handsets will ring at the same time ("paging"), even if ringer tones are switched off.

The current (local) IP address for the base station appears in the handset displays. 

¤

Briefly press the registration/paging key on the base station (page 2). 

Or

¤

Press the talk key 

c or end call key a on any handset.

If six handsets are already registered to the base station, there are two options:
– The handset with the internal number 6 is in idle status: the handset you wish to register is 

assigned the number 6. The handset that was previously number 6 is de-registered.

– The handset with the internal number 6 is being used: the handset you wish to register cannot be 

registered.

You can also make changes on the base station with a Gigaset S45 or S67H handset.