TP-LINK TD-8817 User Manual

 

36 

Other operations for the entries are as follows: 
Enter the index of assigned entry, click the DELETE button to delete the entry. 

Click the BACK button to return to the previous screen. 

Click the CANCEL button to cancel the configuration which is made just now. 

Choose “Advanced Setup→NAT”, select Multiple in Number of IPs. Click IP Address Mapping, 

then you can configure the Address Mapping Rule in Figure 4-26. The IP Address Mapping is for 

those VCs that configured with multiple IPs. The IP Address Mapping rule is per-VC based (only 

for Multiple IPs' VCs). 

 

Figure 4-25   

 

Figure 4-26   



  Rule Index: Select the Address Mapp

x for this VC. You can specify 8 rules in 

 There are four types, one-to-one, Many-to-One, Many-to-Many Overload and 

he local IP Address you plan to mapped to. Local Start IP is the 

blic Start IP is the 

ing Rule inde

maximum. 



  Rule Type:

Many-to-Many No-overload. 



  Local Start & End IP: Enter t

starting local IP address and Local End IP is the ending local IP address. If the rule is for all 
local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255.   



  Public Start & End IP: Enter the public IP Address you want to do NAT. Pu

starting public IP address and Public End IP is the ending public IP address. If you have a 
dynamic IP, enter 0.0.0.0 as the Public Start IP.