Auto Page rs-1000 User Manual

Page of 24
                     
RS1000 OP 1/07 
13
 
E. ACTIVE ARMING – LOCK & ARM: 
1. Press the 
  button on the transmitter. 
2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The 
vehicle door will lock upon arming when interfaced with the security system. 
 
     
 
 
 
 
 
 
AJAR WARNING: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.   
 
SILENT ARMING:
 
Spin up the
   
switch to the page
 1
 and then press the “Silent Arm” button
 
or press the 
transmitter 
  and 
  buttons at the same time to arm your security system, No chirp sound will be heard, 
arm confirmation will be through the vehicles parking lights only. 
 
SENSOR BY-PASS:   
Bypass The Zone 4: Spin up the
   
switch to the page
  2
 and 
then press the button 
1
 or press the 
  button on the transmitter 
two times within 3 seconds. This will arm the security system and 
by-pass the zone 4-shock sensor.
 
 
 
 
The system will chirp one additional time to confirm the sensor bypass mode was 
activated. The sensor bypass feature is programmed to activate for one arming cycle 
only. The security system will return to normal operation during the next arming 
cycle. 
 
 
HIDDEN ALARM FUNCTION (Silent Alarm): Spin up the   switch to the page 1 
and then press the “Hidden Alarm” button or press the 
 button first; within 3 
seconds press the   button to activate the hidden alarm function. The security 
system will arm and with “Hidden Alarm Function” The siren / horn will be silenced 
even if the unit is triggered in the armed status. Notification will only be through the 
hand held two-way remote. 
 
 
F. PASSIVE ARMING (Programming Required) 
Active arming / disarming is controlling your security system via the remote transmitter. This security 
system is equipped with an optional Passive Arming feature which allows the security system to arm 30 
seconds after the last door is closed. Operation is as follows.   
1. Turn the ignition to the “OFF” position and exit the vehicle. 
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any 
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the 
vehicle all entrances are closed. 
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1] 
time and the parking lights will flash [1] time. 
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
    The vehicle doors will automatically lock after passive arming cycle has been completed. 
PASSIVE ARMING BY-PASS: While the system disarmed, Press the 
  button twice, the security will 
respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporary state for 
as long as you wish. To exit passive by-pass, press the transmitter 
  or 
  button and the system will 
return to normal status.   
G. ACTIVE DISARMING – UNLOCK & DISARM: 
1. Press 
  button on the transmitter. 
2. The siren will chirp twice and parking light flash twice to indicating that the security system is now 
disarmed. The vehicle’s door will unlock and dome light turns on for 30 seconds upon disarming when 
interfaced with the security system.