Siemens 2010 tango User Manual

kap06.fm5

18.7.99

Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619

If your telephone is connected to a line with dial pulsing 

(DP), you can switch to dual-tone multifrequency signal-

ling (DTMF) once the connection has been set up.

Precondition: an external connection exists.

If the handset has been locked for external calls

(➔ page 45) and a DSS number is stored (➔ page 45),

it is possible to dial this direct number despite the lock.

B 

*

Select and confirm. The symbol 

 

F

 appears in the display.

When you have switched to DTMF, you can 

switch between the two signalling methods 

during the connection using the 

R

 signal key. 

When the line is disconnected, the telephone 

will automatically return to the original signalling 

method.
Any digits or symbols that you enter after 

switching signalling methods are not stored in 

the memory for redialling.

o

Press any key on the handset. The direct number is

dialled.

It is not possible to dial a DSS number from a 

locked handset,

●

if “unrestricted trunk access or outward re-

stricted trunk access“ is set (➔ page 44), or

●

if the base station is locked 

(➔ page 40).

Replace the handset in the loading unit. The line is dis-

connected.

a

Disconnect (on-hook key).