Alliance Laundry Systems D677I User Manual
Operation
510969
44
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 5: Start Dryer
Metered Models
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle),
press the PUSH-TO-START button.
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle),
press the PUSH-TO-START button.
Figure 38
Nonmetered Models
Rotate timer knob to desired time setting (up to
60 minutes). Press the PUSH-TO-START button. IN
USE light will come on (indicating start of cycle).
60 minutes). Press the PUSH-TO-START button. IN
USE light will come on (indicating start of cycle).
Figure 39
Remove knits when slightly damp because overdyring
may cause shrinkage. Do not tumble dry knit woolens.
may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. Refer to page 42.
overload protector may have cycled. Refer to page 42.
W297I
W297I
METERED MODELS
D774I
D774I
NONMETERED MODELS