Siemens gigaset 4010 hwcd8518(3)p-tsdl User Manual
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Adding IDD code to the incoming calls
(handset and base)
Press the Mem/Prog key for 3 seconds
Press Channel/Select key till “Lo CodE” appears
Enter one digit of IDD code, which can be deleted by pressing
the Flash/Clear key.
Press Mem/Prog key for confirmation
Press Exit to exit
the Flash/Clear key.
Press Mem/Prog key for confirmation
Press Exit to exit
Adding external mark to the incoming calls
(handset and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until “Add” appears
Enter one digit of “9”. (For example, you need to enter “9” for
placing outgoing calls. When placing an outgoing call, you must
enter “9” before dialing out.)
Press the Mem/Prog key for confirmation
Press Exit to exit
placing outgoing calls. When placing an outgoing call, you must
enter “9” before dialing out.)
Press the Mem/Prog key for confirmation
Press Exit to exit
Adjust the LCD light (handset and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key till “LCD” appears
Press Ʒ or ͩ to adjust the light
Press the Mem/Prog key for confirmation
Press Exit to exit
Selecting Ringer Tones (handset and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until “Ring” appears
Press Ʒ or ͩ to select the ringer melody. (8 melodies)
Press the Mem/Prog key for confirmation
Press Exit to exit
9