Siemens 3000 v3.0 User Manual
Conducting calls – enhanced functions
45
Step-by-Step
c
Press the Talk key.
Call the system menu.
> <
[
Select and confirm the menu item.
> <
[
Select and confirm the menu item.
#o
Press the "#" key and enter the required code (0... 9).
The connected computer responds. The computer will
guide you through the data entry process. It will proc-
ess your entries directly.
guide you through the data entry process. It will proc-
ess your entries directly.
a
Press the On-hook key to end the process.
Activating control relays
The service engineer can set up a maximum of 4 control
relays that enable various equipment (e.g. door opener)
to be activated and deactivated.
relays that enable various equipment (e.g. door opener)
to be activated and deactivated.
It is possible to access a specific control relay. Depend-
ing on the configuration, the control relays can be
•
ing on the configuration, the control relays can be
•
activated and deactivated automatically, or
•
activated and deactivated automatically on the basis
of a timer.
of a timer.
Prerequisite: The service engineer has set up at least
one switch.
one switch.
This function can also be called by entering the code
(
(
Activating a control relay
c
Press the Talk key.
Call the system menu.
> <
[
Select and confirm the menu item.
> <
[
Select and confirm the menu item.
o
Follow the user guidance system from this point on-
wards. Enter the required switch code (1... 4).
wards. Enter the required switch code (1... 4).
a
Press the On-hook key to end the process.
Menu
Service?
*42=Tel. data
service?
TDS code:
TDS code:
Menu
Service?
*90=Control Relay
On?