honda-automobiles mm60 User Manual

You may operate your 

MM60 mower with three- 

point hitch mounted attachments and with the 
FL6555 Front Loader sub frame only. You must 
not operate or install the mower while any other 
attachments are installed on the tractor. 

Using Three-Point Hitch Attachments 
1

. Start the engine and set Lift Control Lever to 

“UP” and raise the mower to maximum height. 

Turn Lowering Speed Control 

fully 

clockwise to 

lock 

lift arms in up position. Leave Lift Control 

Lever in 

“UP” position. Stop engine, set brake 

and remove keys. 

Make sure to turn Lowering 

Speed Control fully clockwise to lock hydrau- 

lic system 

before attaching mower deck 

hook. 

This prevents the mower deck from 

descending and causing injury to feet or 
hands. 

2. Pull linchpin holding mower hook to mower 

hook bracket. Turn mower hook in adjusting pin 
so 

that it 

is long enough to reach projecting 

lockup pin on bracket attached to tractor frame 
as 

illustrated. Adjust the mower hook so that it 

fits TIGHTLY over the projecting lockup pin on 
tractor. This 

will 

minimize the backlash on the 

lockup pin when it supports the mower. 

3. 

Slip mower hook over lockup pin, and secure 

with washer 

and 

linchpin removed from mower 

hook bracket. Insert linchpin from front to back 

to lock properly.