Manualsbrain.com
  1. Manuals
  2. Brands
  3. American Dynamics
  4. RAS917
  5. User Manual

American Dynamics RAS917 User Manual

Download
Page of 13
 
SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY 
8200-0184-09, REV. A 
OPERATOR’S MANUAL SUPPLEMENT 
3 of 13
 
Command Description 
14+Quick Set*   WDR Off: Disables Wide 
Dynamic Range (WDR). Use this 
setting when the light level is 
constant or changes in lighting 
conditions are gradual. 
15+Quick Set  
Smooth Scan: Initiates a smooth 
scan between the left and right 
scan limits, starting at the left 
scan limit. If no scan limits have 
been set, initiates a smooth 360° 
clockwise rotation around the 
dome axis using the current tilt, 
zoom and focus settings.  
16+Quick Set  
Stepped Scan: Initiates a scan 
between the left and right scan 
limits pausing briefly every 10° (at 
1x zoom), starting at the left scan 
limit. When the right scan limit is 
reached, the scan is reversed. If 
no scan limits have been set, 
initiates a clockwise rotation 
around the dome axis pausing 
briefly every 10° (at 1x zoom) for 
3 seconds using the current tilt, 
zoom and focus settings.  
17+Quick Set  
Random Scan: Initiates a scan 
between the left and right scan 
limits pausing randomly between 
the limits. If no scan limits have 
been set, initiates a clockwise or 
counter-clockwise rotation around 
the dome axis using the current 
tilt, zoom and focus settings. The 
dome pauses randomly as it 
rotates around the axis. 
20+Quick Set  
Dome Information: Displays the 
Dome Information screen 
available through the dome 
configuration menu. 
Refer to your controller manual to determine if the 
Quick Set Menu feature is supported. For more 
information about these settings, see your 
SpeedDome Ultra VII Configuration Utility 
Operator’s Manual. See also: 
Topic Page 
Auto Iris/Auto Focus 
Resume Setting 
Normally, the camera’s iris and focus settings 
return to automatic mode when the dome moves a 
minimum of one frame from its current pointing 
position. In some situations, you may want to 
maintain specific iris and/or focus adjustments 
based upon your surveillance needs. 
Use the I/F Return to Auto setting on the 
Pan/Tilt/Zoom/Sync Opts menu to configure the 
auto iris and auto focus resume settings. 
Figure 3: Pan/Tilt/Zoom/Sync Options menu 
PROPORTIONAL FLIP
OFF/ON
1ST ZOOM STOP X
33/22 
MAX TOTAL ZOOM X
44...242 
LINE LOCK
ON/OFF
FREEZE FRAME
OFF/ON
I/F RETURN TO AUTO
OFF/ON/
IRIS/FOCUS
 
 
Four settings are available: On, Off, Iris and Focus. 
Setting Description 
On  
Both return to auto iris and return to 
auto focus settings are enabled. 
Moving the dome resumes auto mode 
for both iris and focus changes. 
Off 
Both return to auto iris and return to 
auto focus settings are disabled. 
Moving the dome does not resume 
auto mode for iris and focus changes. 
Iris 
Only return to auto iris is enabled. 
Return to auto focus is disabled. 
Moving the dome resumes auto iris 
mode without changing focus settings. 
Focus  
Only return to auto focus is 
enabled. Return to auto iris is 
disabled. Moving the dome resumes 
auto focus mode without changing iris 
settings.