Alliance Laundry Systems 504523R3 User Manual
30
504523
Before You Call For Service . . .
You may save time and money by checking the following:
•If Your Dryer:
Does
Not
Start
Does
Not
Heat
Does not Dry
Clothes
Satisfactorily
Possible Reason — Do This To Correct
•
Metered models—Insert coin(s) or card.
•
•
Nonmetered models—Turn the timer knob further into the cycle.
•
Be sure the cord is plugged all the way into the electrical outlet.
•
Close the loading door.
•
Make sure the controls are in a HEAT setting.
•
•
Metered models—Activate time accumulator. Push the coin slide all the
way in.
way in.
•
Press the PUSH-TO-START button.
•
•
Has the laundry room fuse blown or become loosened, or is a circuit
breaker OFF? The dryer itself does NOT have an electrical fuse.
breaker OFF? The dryer itself does NOT have an electrical fuse.
•
Has the motor overload protector cycled? Wait 10 minutes and try again.
•
Gas Dryers Only—Check to see if the gas valve in the dryer (behind the
lower front panel) and the main gas line valve are turned on.
lower front panel) and the main gas line valve are turned on.
•
Clean the lint filter.
•
•
Check the exhaust duct to the outside to see if it is kinked, blocked or
needs cleaning.
needs cleaning.
•
•
Check the weather hood to make sure the flappers move freely, are not
pushed in or have not been blocked.
pushed in or have not been blocked.
•
Is the load too small? Small loads may not tumble properly or dry
evenly.
evenly.