Epson DC-10s User Manual

Notices

Follow these safety instructions when setting up and using the document camera:

■

Before setting up the document camera, read all safety and operating instructions. 
Keep the instructions for future reference.

■

Be sure to adhere to all warnings in the documentation and on the document camera.

■

Carefully follow the instructions in this guide to set up and use the document camera.

■

Turn off and unplug the document camera before cleaning. Clean with a damp cloth 
only. Never use liquid or aerosol cleaners, or solvents or harsh chemicals like benzene 
or paint thinner, as these may damage the document camera.

■

Avoid looking directly into the illumination lamp. The bright light could damage 
your eyes.

■

Never point the lens into the sun, as this may damage the document camera.

■

Use only attachments and accessories recommended by Epson.

■

Never use the document camera near water—for example, near a bath tub, kitchen 
sink, laundry tub, or swimming pool. Do not spill liquid on the document camera.

■

Do not place the document camera near a radiator or heating vent or in direct 
sunlight. Avoid placing it near equipment that generates heat.

■

Avoid locations that are subject to shocks or vibrations, dust, or rapid changes in heat 
or humidity.

■

Place the document camera on a flat, stable surface that extends beyond its base in all 
directions. 

■

Do not block or cover openings in the camera head, or insert objects through the 
slots. These openings are provided for ventilation to protect the document camera 
from overheating. Leave enough room around the document camera for sufficient 
ventilation.

■

Place the document camera near a wall outlet where the plug can be easily unplugged.

■

Use only the type of power source indicated on the document camera label. 

■

Connect the document camera to a properly grounded power outlet. Avoid using 
outlets on the same circuit as air control systems or other high-load devices that 
regularly switch on and off.