Alliance Laundry Systems Clothes Dryer User Manual

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

512686

28

1. Remove slide extension parts from parts 

accessories bag included in unit.

2. If installing a Greenwald coin slide, position 

extension lever (to be installed on extension 

bracket) with arm that has one star facing down. 

Refer to Figure 26.

3. If installing a Monarch or ESD coin slide, 

position lever with arm that has two stars facing 

down. Refer to Figure 26.

4. Install extension lever with rounded corner 

facing away from extension bracket using bolt, 

one or two flat washers (shims) (use number of 

washers included in kit) and nut. Refer to 

Figure 27. Make sure washers are flat against 

bracket.

5. Torque nut between 2 and 2.26 Nm (18 and 20 

inch-pounds), or tighten nut firmly.

6. Install extension spring in bracket hole and hole 

in upper arm of lever. Refer to Figure 27.

7. Bend loops closed after installation.
8. Check to make sure the lever swings freely.

1. Install slide extension onto top of coin slide using 

two remaining screws and lockwashers. Refer to 

Figure 28.

2. Insert coins and partially extend coin slide.
3. Insert coin slide on its side through meter case 

opening. Then rotate 90 degrees to its proper 

orientation.

4. Return coin slide and hook slide pins onto meter 

case. 

5. Continue coin slide installation according to 

manufacturer’s instructions.

TLW2088N

Figure 26 

TLW2089N

Figure 27 

TLW2089N

Figure 28 

TLW1564K