Alliance Laundry Systems uw80av User Manual

Page of 28
Operation
13
F232227
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operating Instructions
1. When display shows “Cyxx,” washer-extractor is 
ready to be loaded with laundry.
2. Use left hand to press and hold the door unlock 
button located on the lower right front of the 
control panel. Refer to Figure 3.
Figure 3 
3. Use right hand to turn door handle clockwise and 
swing the door left to open. Refer to Figure 4.
Figure 4 
4. Load the washer-extractor to full capacity 
whenever possible, but do not exceed the rated 
dry-weight capacity of the machine if the fabric 
to be washed is quite dense, closely woven, and 
heavily soiled.
Overloading can result in an inferior wash. The 
operator may need to experiment to determine 
load size based on fabric content, soil content, 
and level of cleanliness required. Do not 
underload the machine. Underloading can result 
in premature bearing and sealing failure and out-
of-balance situations.
Figure 5 
PHM626N
PHM593N
<
<
1
2
3
4
5
6
PHM590N
WARNING
MACHINE MAY BE HOT
AND CAUSE BURNS   
ATTEMPT NO ENTRY UNTIL
BASKET HAS STOPPED
SERIOUS INJURY MAY RESULT   
Do not operate machine in a cycle with 
program keymode switch in program 
position. Program keymode switch must 
be in run position at all times, except 
when editing or programming cycle or 
setup information. 
W528
WARNING
Do not operate machine in a cycle or if 
spinning with program keymode switch in 
program position.
W529
WARNING