Philips LX600 User Manual
English
16
IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 7).
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 7).
Selecting surround sound
●
In DISC COAX or DISC OPTI mode, if
the audio signal received is Dolby Digital
or DTS, pressing SURROUND button
will cyclic through :
the audio signal received is Dolby Digital
or DTS, pressing SURROUND button
will cyclic through :
DOLBY DIGITAL / DTS
™ STEREO
™ VSS (Virtual Surround Sound)
●
Otherwise, pressing SURROUND
button will cyclic through :
button will cyclic through :
MOVIE
™ MUSIC ™ PRO LOGIC
™ STEREO ™ VSS
Helpful Hints:
– The available Surround outputs include:
Dolby Digital, DTS (Digital Theatre Systems)
Surround, Dolby Pro Logic II and Dolby Pro
Logic.
– In VSS (Virtual Surround Sound) mode, the
surround channel is reproduced through two
front speakers.
– MOVIE and MUSIC are Dolby Pro Logic II
surround sound.
– The surround feature is not available in
DISC 6CH mode.
– The centre and rear speakers operate only
in multichannel surround mode.
– The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
– The available Surround outputs include:
Dolby Digital, DTS (Digital Theatre Systems)
Surround, Dolby Pro Logic II and Dolby Pro
Logic.
– In VSS (Virtual Surround Sound) mode, the
surround channel is reproduced through two
front speakers.
– MOVIE and MUSIC are Dolby Pro Logic II
surround sound.
– The surround feature is not available in
DISC 6CH mode.
– The centre and rear speakers operate only
in multichannel surround mode.
– The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
●
Press SOUND on the remote to select
the available sound effect.
the available sound effect.
In Dolby Digital, DTS, PRO LOGIC or
PRO LOGIC II (MOVIE) surround mode,
you can select :
CONCERT, DRAMA, ACTION (default
setting) or SCI-FI.
PRO LOGIC II (MOVIE) surround mode,
you can select :
CONCERT, DRAMA, ACTION (default
setting) or SCI-FI.
In VSS, PRO LOGIC II (MUSIC) surround
mode or in Tuner mode, you can select :
JAZZ, ROCK, DIGITAL (default setting)
or CLASSIC.
mode or in Tuner mode, you can select :
JAZZ, ROCK, DIGITAL (default setting)
or CLASSIC.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
– For flat sound output, select CONCERT or
CLASSIC.
Adjusting the Bass/Treble
level
level
The BASS (low tone) and TREBLE (high
tone) features enable you to define the
sound-processor settings.
tone) features enable you to define the
sound-processor settings.
1
Press BASS or TREBLE.
2
Within two seconds, use the VOLUME
control to adjust the Bass or Treble level
(-10dB ~ 10dB, default setting - 0dB).
control to adjust the Bass or Treble level
(-10dB ~ 10dB, default setting - 0dB).
➜
If the volume control is not used
within two seconds, it will resume its
normal volume control function.
normal volume control function.
➜
If headphone is connected, it will
disable the bass/treble controls.
Sound Controls