Philips LX600 User Manual
English
18
IMPORTANT!
Make sure the FM and MW
antennas are connected.
Make sure the FM and MW
antennas are connected.
Tuning to radio stations
1
Press TUNER on the remote (or press
SOURCE control on front panel) to
select “
SOURCE control on front panel) to
select “
FM” or “MW”.
2
Press and hold
S / T on the
remote until the frequency indication
starts to change, then release.
starts to change, then release.
➜
"
FM SEARCH" appears.
➜
The next radio station will tune
automatically.
➜
lights up for FM stereo reception.
3
To tune a weak station, press
S / T
briefly and repeatedly until an optimal
reception is found.
reception is found.
Helpful Hint:
– If the FM radio station is transmitting RDS
(Radio Data System) signal, the RDS name
will be displayed and stored.
– If the FM radio station is transmitting RDS
(Radio Data System) signal, the RDS name
will be displayed and stored.
Presetting radio stations
You can store up to 40 preset radio
stations in the memory.
stations in the memory.
Automatic presetting
You can store all available radio stations
automatically.
automatically.
1
In tuner mode, press and hold PROG for
five seconds to enter system setup.
five seconds to enter system setup.
2
Press
S / T to select “AUTO
PROG”.
AUTO PROG
3
Press PROG to confirm.
➜
“
CONFIRM” appears.
4
Press PROG again to start automatic
presetting.
presetting.
➜
“
SEARCH” appears.
➜
All the available radio stations with
strong transmission signal will be stored.
➜
Automatic preset will begin from
preset (1) and all your former presets will
be overridden.
be overridden.
Manual presetting
You can choose to store only your
favourite radio stations.
favourite radio stations.
1
Tune to your desired radio station (see
“Tuning to radio stations”).
“Tuning to radio stations”).
2
Press PROG
.
➜
“
PROGRAM
” and “
PRESET
” icons appear.
NIGHT
SLEEP
MUTE
PRESET
PROGRAM
TUNER
3
Use the numeric keypad (0-9) to
select a desired preset number.
select a desired preset number.
➜
If “
PROGRAM
” icon goes off before you
select the desired preset number, press
PROG button again.
PROG button again.
4
Press PROG again to store.
5
Repeat steps
1
~
4
to store other radio
stations.
Helpful Hints:
– If you attempt to program more than 40
preset radio stations, “
– If you attempt to program more than 40
preset radio stations, “
PROG FULL”
appears.
– The system will exit presetting mode if no
button is pressed within two seconds.
– The system will exit presetting mode if no
button is pressed within two seconds.
Selecting a preset radio
station
station
●
Press 1 2 or use the numeric keypad
(0-9) to select a preset number.
(0-9) to select a preset number.
➜
The preset number follow by radio
frequency will appear.
Tuner Operations