Hitachi cg32w460n User Manual
GB - 12 -
Selecting Menu Language
Menu language can be chosen by pressing “ ” or “ ” button
on LANGUAGE item.
on LANGUAGE item.
AV-2 OUTPUT
From AV-2 OUTPUT, either TV or AV-1 can be given. TV or
AV-1 can be chosen by pressing “ ” or “ ” button on "AV-2
AV-1 can be chosen by pressing “ ” or “ ” button on "AV-2
-2
OUTPUT".
To Store Settings
In Feature menu all settings are stored automatically.
Install Menu
• To enter the Install menu directly, press the BLUE button, or
• Press "
" button, now you are in Main menu. In the Main
menu, select “INSTALL.” using “ “ or “ ” button. Then enter
the Install menu pressing “ ” or “ ” button.
the Install menu pressing “ ” or “ ” button.
Selecting Programme
To select programme number, you can use “ ” or “ ” button,
Digit Buttons or The Double Digit button with digit buttons.
Digit Buttons or The Double Digit button with digit buttons.
Selecting Band
BAND, can be chosen either,
• VHF1, VHF3 or UHF by “ ” or “ ” button.
Selecting Frequency
The frequency value is,
• 044 - 890 MHz for band VHF1 - VHF3 - UHF.
• 044 - 890 MHz for band VHF1 - VHF3 - UHF.
FREQUENCY can be changed by “ ” or “ ” button, by the
Digit buttons or by the Double Digit button with digit buttons.
The decimal value in frequency can not be changed by the digit
Digit buttons or by the Double Digit button with digit buttons.
The decimal value in frequency can not be changed by the digit
buttons, it can be changed only by the “ ” or “ ” button. The
value can be “00”, “25”, “50” and “75”. Also changing Fine Tun-
ing changes the decimal part.
value can be “00”, “25”, “50” and “75”. Also changing Fine Tun-
ing changes the decimal part.
Standard
The "STANDARD" setting is fixed to "BG". You cannot
change this item's setting.
Selecting Search
change this item's setting.
Selecting Search
To start the search process, press “ ” button for forward search
or “ ” button for backward search. SEARCH item blinks dur-
ing search process, since the process is stopped or signal is
found. During search process the semi-transparent menu back-
ground becomes "BLUE". To stop the search process “ ” or
“ ” button must be pressed again.
or “ ” button for backward search. SEARCH item blinks dur-
ing search process, since the process is stopped or signal is
found. During search process the semi-transparent menu back-
ground becomes "BLUE". To stop the search process “ ” or
“ ” button must be pressed again.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjustment (after
coarse adjustment), if you are not happy about the image on the
screen.
You can use the Fine Tuning process for fine adjustment (after
coarse adjustment), if you are not happy about the image on the
screen.
Use “ ” or “ ” button on FINE TUNING item, until getting the
best image on the screen.
best image on the screen.
To Store Settings
Press “ ” or “ ” button on STORE option to store Install menu
settings.
settings.
Programme Menu
• To enter Programme menu directly, press the "
" button, or
• Press "
" button, now you are in Main menu. In the Main
menu, select “PROGRAM.” using “ “ or “ ” button. Then
enter the Programme menu pressing “ ” or “ ” button.
enter the Programme menu pressing “ ” or “ ” button.
By moving the cursor in four directions you can reach 30
programmes in the same page. By scrolling the pages up or
down by pressing the navigation buttons you can select all the
programmes in TV mode (except the AV mode).
programmes in the same page. By scrolling the pages up or
down by pressing the navigation buttons you can select all the
programmes in TV mode (except the AV mode).
In menus, “ “ and “ ” buttons are working like "Direction Up"
and "Direction Down".
By cursor action, programme selection is done automatically.
Selected programme is displayed with “CYAN” characters. In
order to select programme is also possible by using digit or
double-digit button. In this way programme selection is auto-
matic and after selection the selected programme is displayed
with cyan characters. The TV Status is changed by the
programme selection too. When using double-digit button in
order to select a programme, the Programme Number in TV
Status OSD is displayed in "P --" form, and by pressing digit
buttons they are displayed in it.
Programme Number is between 00 and 99. Programme Name
has a name string with 5 characters. After autostore process the
Programme Names are set to "PR01" (programme number),
At the bottom of the menu there is a programme sort functions
section. Each function is activated by colour button (seen be-
and "Direction Down".
By cursor action, programme selection is done automatically.
Selected programme is displayed with “CYAN” characters. In
order to select programme is also possible by using digit or
double-digit button. In this way programme selection is auto-
matic and after selection the selected programme is displayed
with cyan characters. The TV Status is changed by the
programme selection too. When using double-digit button in
order to select a programme, the Programme Number in TV
Status OSD is displayed in "P --" form, and by pressing digit
buttons they are displayed in it.
Programme Number is between 00 and 99. Programme Name
has a name string with 5 characters. After autostore process the
Programme Names are set to "PR01" (programme number),
At the bottom of the menu there is a programme sort functions
section. Each function is activated by colour button (seen be-
01-ENG-(CG32W460AN)-3253W-3040-AK37-ST7P-PLLFS-APS-BG-50050266.p65
13.07.2004, 13:42
12