Manualsbrain.com
  1. Manuals
  2. Brands
  3. MGE UPS Systems
  4. AmpMeter PDU
  5. User Manual

MGE UPS Systems AmpMeter PDU User Manual

Download
Page of 52
 
 
3. Operations 
Displaying serial port information 
The Show Ports command displays information about all serial ports.  This information includes:  
• 
Serial port data rate 
• 
Descriptive port name, if applicable 
• 
DSR signal checking settings 
To display serial port information: 
At the AmpMeter PDU: prompt, type 
show ports
 and press 
Enter
. 
Example 
The following command displays all serial port information: 
AmpMeter PDU: show ports<Enter> 
   Serial Port Configuration 
      ALL Ports: 
         Baud Rate: 38400 
      Console Port: 
         DSR Check: ON 
System Administration 
Creating a location description 
The Set Location command specifies text that appears in the HTML control screen’s Location field. The text is 
also appended to a Welcome to banner that appears when a user successfully logs in serially or through a 
Telnet session. 
If you do not issue this command, or if you issue this command without specifying any text, the control screen ’s 
Location field will be blank and no Welcome to banner will be displayed. 
To create a location description: 
At the AmpMeter PDU: prompt, type 
set location
, followed by a descriptive name of up to 24 alphanumeric 
and other typeable characters (ASCII 32 to 126 decimal - spaces are allowed). Press 
Enter
. 
Omitting any characters after typing ‘set location’ deletes any previously specified text. 
Examples 
The following command specifies Florida HQ as the descriptive location for the control screen and the login 
banner: 
AmpMeter PDU: set location Florida HQ<Enter> 
The following command deletes any previously specified location description: 
AmpMeter PDU: set location<Enter> 
In this case, the control screen’s Location field will be blank, and no welcome banner will be displayed after a 
successful login. 
Page 26 - 301-0399-3 Rev B.