Manualsbrain.com
  1. Manuals
  2. Brands
  3. MGE UPS Systems
  4. AmpMeter PDU
  5. User Manual

MGE UPS Systems AmpMeter PDU User Manual

Download
Page of 52
   
3. Operations 
 
Displaying system configuration information 
The Show System command displays all system configuration information.  
• Firmware 
version 
• 
NIC module serial number and MAC address 
• 
Hardware revision code and Flash size 
• 
Uptime since last system restart 
• 
System location description 
To display system configuration information: 
At the AmpMeter PDU: prompt, type 
show system
 and press 
Enter
. 
Example 
   System Information 
      F/W Version:   AmpMeter PDU Version 5.2i 
      NIC S/N:       1600001 
      MAC Address:   00-0a-9c-10-00-01 
      H/W Rev Code:  0 
      Flash Size:    1 MB 
      Uptime:        0 days 6 hours 14 minutes 1 second 
      Location:      Florida HQ 
Creating a descriptive tower name 
The Set Tower Name command assigns a descriptive name to a tower.  This descriptive name is displayed 
when the Show Traps command is issued.  See ??? on page 28 for more information on the Show Traps 
command. 
To create a tower name: 
At the AmpMeter PDU: prompt, type 
set tower name
, followed by the absolute tower name, then the 
descriptive name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces 
are not allowed).  Press 
Enter
. 
Examples 
The following command adds the descriptive name Florida_HQ_1 to tower .a: 
AmpMeter PDU: set tower name .a Florida_HQ_1<Enter> 
Displaying tower information 
The Show Towers command displays information about the AmpMeter PDU.  This information includes the 
absolute and descriptive AmpMeter PDU names. 
To display tower information: 
At the AmpMeter PDU: prompt, type
 show towers
 and press 
Enter
. 
Example 
AmpMeter PDU: show towers<Enter> 
   Tower   Tower 
   ID      Name 
   .A      Florida_HQ_1 
301-0399-3 Rev B. - Page 27