bobcat s205 User Manual
S205 Skid-Steer Loader
Operation & Maintenance Manual
Operation & Maintenance Manual
78
Inner Filter
Only replace the inner filter element under the following
conditions:
conditions:
•
Replace the inner filter element every third time the
outer filter is replaced.
outer filter is replaced.
•
After the outer element has been replaced, start the
engine and run at full RPM. If the HOURMETER /
CODE DISPLAY shows [01-17] (Air Filter Plugged),
replace the inner filter element.
engine and run at full RPM. If the HOURMETER /
CODE DISPLAY shows [01-17] (Air Filter Plugged),
replace the inner filter element.
Figure 139
Remove the wing nut and remove the inner filter
element (1) [Figure 139].
element (1) [Figure 139].
NOTE: Make sure all sealing surfaces are free of dirt
and debris.
Install the new inner element.
Install the outer element.
Figure 140
Install the dust cover and the wing nut [Figure 140] (Be
sure the evacuator (1) [Figure 140] is down).
sure the evacuator (1) [Figure 140] is down).
P-31838
1
P-31836
1