Mitsubishi ah129 User Manual
44
ON/OFF” mode and shows the current setting.
The ON/OFF setting can be selected by pressing the
*
/ #
keys.
When this function is ON the PIN number is automatically
sent to the base station. It can also be sent by using the
“Flash Request”.
sent to the base station. It can also be sent by using the
“Flash Request”.
In order to complete your selection and exit from this mode,
press the “STO,” “END,” or “CLR” key.
press the “STO,” “END,” or “CLR” key.
Note:
•
This PIN number complies with the AT&T
network systems method as detailed in the
Subscriber PIN Access (SPINA) document. The
Ericcson network systems method is not sup-
ported. Check with your carrier for more infor-
mation.
network systems method as detailed in the
Subscriber PIN Access (SPINA) document. The
Ericcson network systems method is not sup-
ported. Check with your carrier for more infor-
mation.
•
Pressing the “
▲
” or “
▼
” key at this stage will
scroll through the secondary menu of the
Security Function.
Security Function.
PIN Number Programming (FCN 95)
Direct Operation: FCN + 9 + 5 + (Security Code) (Standby
only)
only)
If a PIN number is programmed:
PIN No.
1234
If no PIN number is programmed:
PIN No.
_ _ _ _
Function: When you enter “FCN” followed by “9 + 5 +
(Security Code)”, the phone enters the “PIN Number Pro-
(Security Code)”, the phone enters the “PIN Number Pro-