Mitsubishi ah129 User Manual
45
gramming” mode and shows the current programmed PIN
number.
A new PIN number may be programmed by entering a new
four (4) digit PIN number. The PIN number can be cleared
by pressing “CLR” after the digits are entered.
number.
A new PIN number may be programmed by entering a new
four (4) digit PIN number. The PIN number can be cleared
by pressing “CLR” after the digits are entered.
The PIN number can be erased by pressing “FCN”. The
phone will then return to the “-ON-” screen.
phone will then return to the “-ON-” screen.
If the PIN number is erased, the PIN number enable state
will be set to “OFF” (FCN 94), and that screen will now read
“PIN N.A.”
will be set to “OFF” (FCN 94), and that screen will now read
“PIN N.A.”
To complete your selection and exit from this mode, press
the “STO” or “END” key.
the “STO” or “END” key.
Default settings for each function:
1) Automatic retry
(FCN 1) ................. OFF
2) System selection
(FCN 4) ......... Pref.Sys.
3) Auto answer mode (FCN 5) ................. OFF
4) Last talk time
4) Last talk time
(FCN 7) ........... 00m00s
5) Restriction level
(FCN 91) ......... No restr
6) Status monitor
(FCN 93) ............... OFF
7) PIN status
(FCN 94) ............... OFF
8) PIN number
(FCN 95) ................ Null
FCN 0: Pause Function
User action:
1.
Enter telephone number (xxxxx)
2.
FCN + 0
3.
Enter DTMF number (yyyyy)
4.
FCN + 0
5.
Enter DTMF number (zzzzz)
6.
Press SEND (making a call with xxxxx)