GE DR-1200 User Manual

Rugged Dome Installation Manual 

Mounting the Unit 

 

 

1038346B / February 2003 

11 

To flush-mount the housing, see Figure 9 and perform the following. 

Back plate 

Ceiling panel 

Outer plate 

 

 

Inner plate 

M5x20 pan-head 

double-washer 

screws (3) 

M4x12 pan-head 

double-washer 

screws (3) 

(through housing 

base) 

 

Note: Feed the cables through the ceiling panel, plates, and housing at the appropriate 
time depending on whether you are using the flying lead and whether the cable is external 
or internal to the mounting surface. 

To prepare the ceiling panel perform the following. 

1)  Remove the ceiling panel from the ceiling. 

2)  Position the back of the outer plate on the ceiling panel at the 

installation location.