GE DR-1200 User Manual

Rugged Dome Installation Manual 

Mounting the Unit 

 

 

1038346B / February 2003 

9 

To surface-mount the housing, see Figure 8 and perform the following.  

Mounting  

surface 

Anchors 

Outer plate 

Inner plate 

M4x20 truss-head 

tapping screws 

(3)  

M4x12 pan-head 

double-washer 

screws (3) 

(through housing 

base) 

 

Note: Feed the cables through the mounting surface, plates, and housing at the 
appropriate time depending on whether you are using the flying lead and whether the cable 
is external or internal to the mounting surface. 

To prepare the mounting surface perform the following. 

1)  Position the outer plate on the mounting surface at the installation 

location. 

2)  Trace the position of the mounting holes. 

3)  If you are using the back cable entry, trace its outline. 

4)  Drill the outlined mounting holes.