Microboards Technology gx-1 User Manual

• Setting Printer Alignment 

 

The GX-1 Disc Publisher system has been aligned at the factory. The factory alignment values are on 
a label on the back of the GX-1 Disc Publisher.  Follow these steps to enter the factory values: 

•  Click on the Start Button on your 

Windows computer. 

• Select 

Settings and then 

Printers.  

•  Right click on the Microboards 

GX Series icon. 

• Select 

Printing Preferences. 

• Select 

the 

Utility Tab. 

•  Click on the .1mm selection in 

the Resolution box.  

•  Enter the values listed with the 

GX-1 Disc Publisher into the Top 
and Left Side boxes. 

• Click 

the 

Apply button. 

• Click 

the 

OK button. 

To confirm the computer is communicating with the GX-1 Disc Publisher, print a Test Disc.  This can 
be done with one of the inkjet printable CD’s included with your GX-1 Disc Publisher, or an inkjet 
compatible disc you may already have. To print the Test Disc: 

•  Place the inkjet printable 

media into the input hopper. 

•  Launch the Zulu2 program 

(see page 17). 

•  Once Zulu2 is running, select 

the Robotic menu 

• Select 

Utilities 

• Select 

Print Test Disc. 

•  A disc will be dropped onto 

the belts and then printed.   

•  Once printing is complete, 

the disc will be ejected into 
the output hopper. 

•  If the alignment is OK, 

proceed with your printing 
project. 

•  If not, go to Print Alignment 

Disc.