Microboards Technology gx-1 User Manual

 

There are factory default alignment values for the TOP and LEFT values for your GX-1 Disc 
Publisher, referring to the top and left margin sizes, respectively.  These can be found on the label on 
the back of the GX-1 Disc Publisher.  You may need to adjust the values, depending on the images 
you are printing.  To run the alignment utility, first set the Top and Left values are 0 (zero).  

1.  Place an Alignment CD (see figure 1) in the input bin. 

2.  In the Utilities menu, select Print Alignment Disc. 

3.  The alignment guide will be printed on the disc (see figure 2). 

4.  Confirm the numbers that cross the circle. 

5.  If the circle does not cross the alignment guide at both zero points, change the vertical and 

horizontal numbers in the Utility Tab by the number at which the circle does cross the guide 
(See figure 3). 

6.  Once the new numbers are entered, click Apply.  

7.  The Alignment CD pattern is also included on the GX-1 Disc Publisher CD, so you can print 

additional Alignment patterns with your GX-1 Disc Publisher, once it is aligned.  The 
alignment circle is 8 cm in diameter and is 2 cm from the outer edge of the CD. 

Figure 3 

Figure 2 

Figure 1