Microboards Technology gx-1 User Manual

 

The Microboards GX-1 Disc Publisher has the following minimum requirements and compatibilities: 

Microsoft Windows 2000 with SP4 or Windows XP with SP2.  

Pentium 4 (or equivalent) CPU, running at 2.0 GHz or faster.  

Minimum 512 MB of system memory. More memory is suggested for DVD recording operation.  

Only 10MB of free space is required on the system hard drive for the applications and drivers. For 
storing disc images, temporary space is needed for the full disc dimension. That could be up to about 
800MB for CD or about 5 GB for DVD.   

A separate internal 7200 RPM hard drive is recommended for storing your data.  Using the same 
hard drive as the operating system can cause the system to perform slowly. 

USB 2.0 is required.  USB 1.1 is not supported, as using USB 1.1 will result in significantly longer 
recording times and the potential for recording failures. 

Remove the GX-1 Disc Publisher system from the shipping box 
and confirm you received all of the items. 

Place the GX-1 Disc Publisher on a stable, flat surface.  You will 
need room both in front and to the left of the system, as discs will 
be accessed from both locations. 

The input bin posts are pre-installed, with the wide post to the 
front. 

The Reject Bin is pre-installed on the left side of the GX-1 Disc 
Publisher.  This bin, which slides out, should be emptied when 
you know discs have been rejected. 

Slide the 50-disc Output Bin into the channel between the feet at 
the front of the GX-1 Disc Publisher.