Cissell cissiman38 User Manual

7B Incorrect supply voltage

7C Air switch not being operated

by cam lever

7D Defective air switch

7E Defective Automatic relay

7F Air timer set at 0 time

7G Defective blower relay

7H Defective blower motor

7I

Loose wires

8

Defective start switch

9A Steam timer set at 0 time

9B Defective steam timer

9C Defective steam relay

Check power source.  Voltage
phase and frequency must be the
same as specified on machine
nameplate.
Check lever and cam plate.
Replace either if required.
Check switch to see if it operates
and will carry current.  Replace
switch if necessary.
Operating air switch should cause
automatic relay to operate.  If
defective, replace relay.
Timer knob may slip on the shaft
and leave the timer set at 0 time.
Tighten knob set screw and set
timer and knob to suit, approx. 20
seconds.
Check to see if the blower relay
will operate.  If not, replace relay.
Check motor to see if it will
operate on normal nameplate
electrical power.  If not, replace the
motor.
Check to see that all wires and
connections are tight.  If not,
replace the wires and tighten
connections.
Check switch to see that it oper-
ates and will carry current.
Replace switch if necessary.
Timer knob may slip on the shaft
and leave the timer set at 0 time.
Tighten knob set screw and set
timer and knob to suit, approx. 8
seconds.
Check timer operation.  See if
timer switch operates properly.  If
not, replace timer.
Check to see if relay will operate
on rated current and if contacts
will carry current.  If not, replace
relay.

(7) Blower motor won’t start,

machine won’t steam (Cont.)

(8) Blower motor won’t start,

machine steams continuously
after air switch is operated.

(9) Blower motor will start,

machine steams only while
control knob is pushed.